Omron EJ1 - 07-2008, Operation Manual

Page: 68 / 198

49
Allocating I/O from the Configurator Section 4-3
b) To delete an allocated parameter, select the parameter in the Al-
location Area field, and click the Release Button. To delete all the
allocated items, click the Release All Button. The Allocated Area
field will become blank.
Note a) The first word of the allocation area is for the OUT Enable Bit. This
allocation cannot be changed. If any data is assigned to the sec-
ond word or higher, the OUT Enable Bit will be assigned automat-
ically.
b) Do not assign the same parameter more than once.
c) No processing will be performed for parameters for unit numbers
that are not in the configuration.
Icon Description
(Gray) Allocation not possible
(parameter for unit num-
ber not in configuration or
OUT Enable Bit).
(Pink) Allocation possible
(parameter for unit num-
ber in configuration).
Reserved (for OUT
Enable Bit).
(Green) Parameter for unit num-
ber in configuration and
not yet assigned.
(Blue) Parameter for unit num-
ber not in configuration.