Omron EasySpeed 3G3JE, User Manual

Page: 117 / 133

Chapter 6
6-5
Parameter Tables
• Set values for P06, P07, and P08 are changed in increments of 0.1 up to 99.9. From 100 and up
they are changed in increments of 1.0.
• P15 to P19 are not displayed for Standard Models. Refer to the Communications Manual for details.
• P11 is not displayed for Communications Models.
P12 Multi-function output
selection Used to select the function of the
multi-function output terminal.
0: Not allocated.
1: Zero speed (Output turned ON
when the output frequency is 0 Hz
or operation is stopped.)
2: Frequency matching (Output
turned ON when the output fre-
quency and the frequency refer-
ence are the same.)
3: Reverse operation (Output turned
ON when the direction of rotation
is set for reverse operation.)
0 (
0
)
1 (
1
)
2 (
2
)
3 (
3
)
0 None 3-21
P13 Reverse rotation prohibit
selection Used to select the operation for when
a reverse rotation command is input.
F.R:
Forward or reverse rotation
FWD: Forward rotation only (Reverse
rotation prohibited.)
F.R (
f.r
)
FWD (
fwd
)
FWD None 3-22
P14 Carrier frequency selec-
tion Used to set the carrier frequency.
4K: 4 kHz
7K: 7 kHz 4k (
4k
)
7k (
7k
)
4K Hz 3-22
P15 Communications unit
number Used to set the communications unit
number. 0 to 99 1 None 3-24
P16 Communications baud
rate Used to set the baud rate.
24: 2.4 kbps
48: 4.8 kbps
96: 9.6 kbps
192: 19.2 kbps 2.4 (
24
)
4.8 (
48
)
9.6 (
96
)
19.2 (
192
)
9.6 kbps 3-24
P17 Communications data
length Used to set the data length.
7: 7 bits
8: 8 bits 7 (
7
)
8 (
8
)
7 bit 3-24
P18 Communications stop
bits Used to set the number of stop bits.
1: 1 bit
2: 2 bits 1 (
1
)
2 (
2
)
2 bit 3-24
P19 Communications parity Used to set the parity.
non: None
evn:
Even
odd: Odd
non (
non
)
evn (
evn
)
odd (
odd
)
evn None 3-25
P20 Parameter initialization Initializes the parameter set values
(except for the accumulated operat-
ing time) when “ini” is selected. ini (
ini
)
abt (
abt
)
abt None 3-22
P21 Accumulated operating
time clear Clears the accumulated operating
time to zero when “ini” is selected. ini (
ini
)
abt (
abt
)
abt None 3-23
Display Name Description Setting
range (See
note 1.)
Default
setting
Unit Refer-
ence