Omron EasySpeed 3G3JE, User Manual

Page: 22 / 133

Chapter 1
1-4
Overview
■
Digital Operator Part Names
Note Refer to Section 3 Operation for information on moving between modes.
Name Function
Data display Displays relevant data, such as the frequency reference, output frequency, out-
put current, parameter set values, and accumulated operating time.
@ Hz set Frequency ref-
erence Lit when the data display shows the frequency reference.
@
Hz out Output fre-
quency Lit when the data display shows the output frequency.
@
A Output current Lit when the data display shows the output current.
@
Kh Accumulated
operating time Lit when the data display shows the accumulated operating time.
@
RUN RUN indicator Lit while the Inverter is operating.
@
RVS Reverse oper-
ation indicator Lit while the Inverter is operating in reverse.
@
ALM Alarm indica-
tor Lit when a fault is detected or a protective function has been triggered. (Error
information can be monitored in RUN mode.)
@
COM Communica-
tions indicator Lit while data is being sent or received. (Communications models only.)
Mode Key In RUN mode, switches the setting/monitoring indicators. When pressed for one
second or longer, the mode changes from the RUN mode to the initial settings
mode.
Enter Key Enters displayed items, set values, etc.
When this key is pressed for one second or longer, the mode is changed from
RUN mode to adjustment mode.
RUN Key Starts the Inverter if operation with the Digital Operator is selected.
STOP/RESET
Key Stops the Inverter.
This key also clears errors when errors are detected or a protection function
operates.
Operating with the Digital Operator must be selected to use the above key func-
tions.
Increment Key These keys change the displayed set value. They also change the parameter
set in the adjustment mode or initial settings mode.
Decrement
Key
888
RUN
STOP
RESET