Omron EasySpeed 3G3JE, User Manual

Page: 69 / 133

Chapter 3
3-9
Operation
3-4 RUN Mode
3-4-1 Run/Stop Command
Set P01 in the initial settings mode to the rated current given on the motor’s nameplate before opera-
tion. Setting the rated current correctly will protect the motor from burning due to an overload. For
details on the procedure, refer to
3-6-1 Setting the Rated Motor Current .
■
Operating and Stopping
• Press the RUN KEY to operate the motor.
• Press the STOP/RESET KEY to stop the motor.
• The @ RUN indicator will light during operation.
• In RUN mode, operation can always be started or stopped regardless of whatever item is currently
being displayed.
Key sequence Indicator Display example Explanation
@ Hz set Go to RUN mode and press the Mode Key to
light the
@
Hz set indicator. The present fre-
quency reference will be displayed on the
data display.
@ RUN Press the RUN Key to start the motor. The @
RUN indicator will light.
@ RUN
Goes out.
Press the STOP/RESET Key to stop the motor.
The
@
RUN indicator will go out.
60.0
RUN
60.0
STOP
RESET
60.0