Omron EasySpeed 3G3JE, User Manual

Page: 115 / 133

Chapter 6
6-3
Parameter Tables
■
RUN Mode
• The frequency reference can be set between the frequency reference upper limit (P07) and fre-
quency reference lower limit (P08).
• Even if reverse operation is selected, forward operation will be returned to when the power is turned
OFF and ON or initial settings mode is entered.
■
Adjustment Mode
• Set values for SP1 to SP4, ACC, and DEC are changed in increments of 0.1 up to 99.9. From 100
and up they are changed in increments of 1.0.
Name Indicator Data display Setting
range
Default
setting
Unit Refer-
ence
Frequency refer-
ence
@
Hz set The frequency reference is dis-
played. 0.0 to 120 10.0 Hz 3-10
Output fre-
quency @ Hz out The output frequency is displayed. None --- Hz 3-10
Output current @ A The output current is displayed. None --- A 3-10
Accumulated
operating time
@
Kh The accumulated operating time is
displayed. None --- Kh 3-10
Forward/reverse
operation selec-
tion @ RVS
(Lit during
reverse
operation.)
The direction of rotation is dis-
played. FWD (
fwd
)
REV (
rev
)
FWD None 3-10
Name Data
display
Description Setting range Default
setting
Unit Refer-
ence
Frequency
reference 1
sp1
Used to set internal fre-
quency references.
Note: Enabled when
“MSP” is selected
for P11 (Frequency
reference selection).
0.0 to 120 10.0 Hz 3-12
Frequency
reference 2
sp2
0.0 Hz 3-12
Frequency
reference 3
sp3
0.0 Hz 3-12
Frequency
reference 4
sp4
0.0 Hz 3-12
Acceleration time
acc
The acceleration time is
the time required to accel-
erate from 0% to 100% of
the maximum output fre-
quency. (See note.) 0.1 to 999 10.0 s 3-13
Deceleration time
dec
The deceleration time is
the time required to decel-
erate from 100% to 0% of
the maximum output fre-
quency. (See note.) 0.1 to 999 10.0 s 3-13
Application selec-
tion
lod
Sets the V/f pattern as the
basic characteristic
according to the applica-
tion to be used.
CNV: Conveyer applica-
tions
FAN: Fan or pump applica-
tions
CNV (
cnv
)
FAN (
fan
)
CNV None 3-15