Omron CX-MOTION-NCF - V1.8, Operation Manual

Page: 62 / 138

41
Editing Servo Parameters Section 5-2
Entering Value Directly for Parameter
Either enter a value after double-clicking the Setting Value Column or enter
a value directly. After entering a value, press the
Enter Key to save the set-
ting. Once the setting value is changed, the check box of the parameter will
show a check.
Selecting Value from Drop-down List for Each Bit of Parameter
Select a value from the drop-down list. Once the setting value is changed,
the check box of the parameter and each bit will show a check.
Initializing Servo
Parameters
Click the Initialize Button. A confirmation dialog box will be displayed.
Click the OK Button. All the parameters will be set back to their default set-
tings. Once initialization is completed, checks in the check box will be cleared.
Quitting Editing
Click the OK Button. Once all the editing is completed, click the OK Button to
save the edited data.
To cancel the edited data, click the Cancel Button.