Omron CX-MOTION-NCF - V1.8, Operation Manual

Page: 55 / 138

34
Editing Unit Parameters Section 5-1
5-1 Editing Unit Parameters
The methods used to edit data are described in this section. For details on the
setting contents, Unit parameters, and Servo Parameters, refer to the
CS1W-
NC/271/471/F71/CJ1W-NC271/471/F71 Position Control Units Operation
Manual
(Cat. No. W426).
1,2,3... 1. Select Edit - Edit Parameters - NC Unit in the Axis Map Setting Window,
double-click a Position Control Unit, or right-click and select Edit Unit Pa-
rameters from the pop-up menu. The Edit Unit Parameter Window will be
displayed.
Note (1) It can be executed only when the connection to the PLC has been estab-
lished in the CX-Motion-NCF Basic Window.
(2) “All the parameters that are set in the Edit Unit Parameter Window” indi-
cates the parameters that are set in Memory Area Setting, Communica-
tions Setting, and Axis Setting.
Item Explanation
Download Downloads all the parameters that are set in the Edit Unit Parame-
ter Window to a Position Control Unit. (See notes 1 and 2.)
Upload Uploads all the parameters that are set in the Edit Unit Parameter
Window from a Position Control Unit. (See notes 1 and 2.)
Compare Compares all the parameters that are set in the Edit Unit Parame-
ter Window with the parameters saved in a Position Control Unit.
(See notes 1 and 2.)
Initialize Initializes all the parameters (see note 2) that are set in the Edit
Unit Parameter Window to their default settings.
OK Saves the parameters that are set in the Edit Unit Parameter Win-
dow.
Cancel Cancels the parameters that are set in the Edit Unit Parameter
Window.