Omron CX-MOTION-NCF - V1.8, Operation Manual

Page: 102 / 138

81
Axis Monitor Section 8-2
3. Once setup is completed, click the OK Button to save the settings. To dis-
card the settings, click the Cancel Button.
Note If the Monitor Type 1 and 2 of the Position Control Unit's Expanded Monitoring
function are used in the ladder program, etc., do not set them on the Support
Software.
Name Explanation
Present Value Monitor Type 1 Specify the item to be displayed in the top box.
• Command Present Position
• Position Deviation
• Feedback Present Position
• Latch Position
• Target Position
• Feedback Speed
• Command Speed
• Target Speed
• Torque Command
Monitor Type 2 Specify the item to be displayed in the 2nd top
box.
The items to be selected are the same as for the
Monitor Type 1.
Pulse Rate Unit Specify the unit used for displaying values.
• command unit
• pulse
• inch
• mm
• degree
When command unit is set, setting numerator
and denominator of the pulse rate is invalid.
Numerator Set the numerator of the pulse rate.
The setting range is from 1 to 4294967294.
Denominator Set the denominator of the pulse rate.
The setting range is from 1 to 4294967294.