Omron CQM1H - 08-2005, Operation Manual

Page: 195 / 299

175
Reference When scaling is conducted, the scaled conversion data may exceed the range
between 9999 and –9999 even if the input values are within the permissible
range. The scaled conversion data that fall outside the permissible measure-
ment range are treated as overflow values. The input values that fall outside the
permissible range (over-range) are also treated as overflow values.
9999
–9999
Lower limit
Scaled conversion data
Upper limit
Input
Permissible
measurement
range
Overflow
2-2 Timing Hold
The Unit takes samplings of input values that are input from the linear sensor,
computes them, and then holds the computed values. Any of the following timing
hold types can be selected for the Unit.
•
Normal
•
Sampling hold
•
Maximum hold
•
Minimum hold
•
Peak-to-peak hold
Normal If the timing hold is set to normal, the TIMING input is not effective, and the Unit
continues sampling. The reset input is not effective.
Sampling Hold If the timing hold is set to sampling hold, the Unit samples the data at the rising
edge of the timing input to the Unit when the TIMING input is turned ON.
The Unit stops data sampling during the following periods. The data is “BBBB.”
From the moment the Unit is turned ON until the first TIMING input is turned
ON.
Timing Hold
Section 2-2