Olivetti d-color MF451, Instructions Manual

Page: 199 / 321

d-Color MF651/551/451 7-47
7.9 System Connection
7
7.9 System Connection
Configure settings for software, cellular phone, or PDA that can be accessed with this machine.
%
[Utility/Counter] ö [Administrator Settings] ö [System Connection]
Settings
OpenAPI Settings Access Setting Specify whether to allow the user to access this
machine from other system that is using
OpenAPI.
SSL/Port Settings SSL Setting To use SSL encryp-
tion, select [SSL Only]
or [SSL/Non-SSL].
•
If Enhanced Secu-
rity Mode is ena-
bled, [SSL Only] is
enabled.
Port No. Enter a port number.
Port No. (SSL) Enter the port number
to be used for SSL
communication.
Client Certificate Re-
quest Specify whether to en-
able a client certificate
request. If you authen-
ticate the client by re-
questing for its
certificate (verification
of client certificate),
select [Enable].
Certificate Verification
Level Settings To verify a certificate,
configure settings to
verify the certificate.
[Validity Period]:
Select whether to
check that the target
certificate is within the
validity period.
[Key Usage]:
Select whether to
check that the certifi-
cate key is being used
properly.[Chain]: Se-
lect whether to check
that the certificate
chain (certification
path) is correct.
[Expiration Date Con-
firmation]:
Select whether to
check the target certif-
icate for validation.
[CN]:
Select whether to
check that the CN of
the certificate match-
es the server address.
Authentication Specify whether to authenticate an access from
other system that is using OpenAPI.
•
To authenticate, enter the login name and
password in [Login Name] and [Password]
• When user authentication is performed or
when acquiring the device information with
the Authentication Manager, set the Authen-
tication setting of the OpenAPI Setting
screen of the machine to [OFF].