Olivetti d-color MF451 Instructions Manual Download Page 208

Page: 208 / 321

Security Settings

7-56

d-Color MF651/551/451

7.10

7.10.8

Stamp Settings

Manage the stamp.

Press the [Utility/Counter] key

[Administrator Settings]

[Security Settings]

[Stamp Settings].

Reference

To configure copy protect and stamp repeat settings:

Press [Application]

[Stamp/Composition].

7.10.9

Driver Password Encryption Setting

This setting is for the print operations. For details, refer to the "User's Guide [Print Operations]".

Settings

Stamp Settings

Apply Stamps

Configure whether to add a stamp when printing
or sending.
To add a stamp, configure stamp contents set-
tings.

Reference

If a stamp is added, print settings can-
not be configured in "Stamp/Compo-
sition" of "Application".

Delete Registered
Stamp

•

Stamp
Deletes all registered stamps.

•

Copy Protect/Stamp Repeat
Deletes all stamps registered in Copy Protect
and the stamp repeat function.

Factory default

Apply Stamps

Printing: Do Not Apply
Sending: Do Not Apply

Summary of Contents for d-color MF451


































































































































































































































































































































Search results

Summary of Contents for d-color MF451

Reviews:

Related manuals for d-color MF451

Brands by name

Popular brands

Olivetti d-color MF451, Instructions Manual

Search results

Summary of Contents for d-color MF451

Reviews:

Related manuals for d-color MF451

Brands by name

Popular brands