Olivetti d-color MF451, Instructions Manual

Page: 263 / 321

d-Color MF651/551/451 11-3
11.1 Using authentication unit (IC card type)
11
11 Authentication unit (IC card type)
This chapter describes the authentication unit (IC card type).
1. Authentication unit (IC card type) AU-201
11.1 Using authentication unit (IC card type)
The authentication unit (IC card type) is an "IC card authentication " system that reads the IC card to perform
personal authentication. Using this system, you can perform authentication with an IC card to log in to this
machine or execute a print job when User Authentication is enabled in this machine.
To use the authentication unit, first register the card ID of the user in this machine. The registered user, who
is authenticated with the card ID, can log in to this machine or execute a print job. This section explains how
to configure the required settings in this machine, register users, and log in with authentication.
For details on how to place the IC card in the authentication unit, refer to the "Quick Guide
[Copy/Print/Fax/Scan/Box Operations]".
NOTICE
Authentication unit (IC card type) AU-201 must be installed inside the working table WT-506.
Do not disconnect the USB cable while using the authentication unit. Doing so may cause the system to
become unstable.
Do not leave the IC card within 40 mm of the card reader.