Olivetti d-color MF451 Instructions Manual Download Page 249

Page: 249 / 321

d-Color MF651/551/451

10-9

10.1

Using an authentication unit (biometric type)

Checking the version of the installed Data Administrator

From the "Help" menu of Data Administrator, select "Version Information".

NOTICE

This software cannot be used if the version is "3.x". Install "4.x".

If Data Administrator V3.x is installed, it is removed when V4.x is installed.

Click the [Plug-in version].

In "Plug-in information list:", confirm the plugin version of Data Administrator.

This software is available if the plugin version is "4.x".

Setup

Turn the main power of this machine off, and disconnect the authentication unit from this machine.

Install BioDriver (USB-Driver).

Connect the authentication unit to the USB port of your computer.

The "Found New Hardware" dialog box appears.

Select "Locate and install driver software (recommended)".

Insert the application DVD-ROM provided with the authentication unit into the DVD-ROM drive of the
computer.

Summary of Contents for d-color MF451


































































































































































































































































































































Search results

Summary of Contents for d-color MF451

Reviews:

Related manuals for d-color MF451

Brands by name

Popular brands

Olivetti d-color MF451, Instructions Manual

Search results

Summary of Contents for d-color MF451

Reviews:

Related manuals for d-color MF451

Brands by name

Popular brands