4-13
4.13 LCD Error Messages
Your fax machine’s LCD messages can help you spot problems.
LCD error messages (Alphabetic list)
What you see on the LCD
What it means/What to do
All Commands In Use
Your fax machine has all of its 99 possible delayed commands (an
automatic redialling counts as one) stored in memory and cannot accept
another.
Delete an existing command by using
REVIEW COMMANDS
, or wait until your
fax has completed one of the delayed commands.
Box In Use
You tried to erase a F-Code box which contains at least one document.
Erase the document(s), then try again.
Check # Of Pages
You placed fewer pages into your fax machine than you indicated in your
page-numbering setting (see operation manual, page 2.35).
Carefully recount the pages in your document, then re-try the transmission,
being sure to enter the correct number of pages if you use the page-numbering
function.
Call For Service
The scanner lamp is dim or inoperable.
Make repeated copies to help evaporate any internal moisture. If that doesn’t
resolve the problem, replace the scanner lamp.
Check Rx Paper Size
You tried to load the different sized-paper which you’ve told your fax
Open&Close Top Cover
machine. If you try to use another-sized paper without returning the pin
to the proper holes (see pages 1.13–1.14), your fax will sound an alarm
and display the this message when you try to print.
Put the pin in the proper holes.
Close 1
st
Cassette
The first paper cassette is open or has not been closed securely.
Close it.
Close 2
nd
Cassette
The optional second paper cassette is open or has not been closed
securely.
Close it.
Close 3
rd
Cassette
The optional third paper cassette is open or has not been closed
securely.
Close it.
Close 1
st
Side Cover
The first paper cassette’s side cover is open or has not been closed
securely.
Close it.
Close 2
nd
Side Cover
The second paper cassette’s side cover is open or has not been closed
securely.
Close it.
Close 3
rd
Side Cover
The third paper cassette’s side cover is open or has not been closed
securely.
Close it.
Close Book Cover
The book cover is open or has not been closed securely.
Close it.
Close Scanner Cover
The scanner cover is open.
Close it.
Close Top Cover
The top cover is open.
Close it.
Communication Error
A communication error disrupted the reception or transmission.
If you were transmitting, press
STOP
to clear the error message and then re-try
the transmission. If you were receiving a fax, try to contact the other person
and have him/her re-try the transmission. (The problem may be entirely with
his/her machine, phone line, etc.)
Copying Not Completed
You tried to switch to the fax mode by pressing
COPY
/
FAX
during copying
from the multipurpose tray.
Complete the copying first, then try again.
Summary of Contents for OKIOFFICE 120
