Error Messages
- 133 -
Tr
ou
bles
ho
otin
g
7
Restart the device.
%ERRCODE%: Error
Blinks
An error occurred in the device.
Turn the machine off and then on again.
If the error is not resolved, contact Oki Data's
customer support center.
Inspection is required.
%ERRCODE: Error
Blinks
An error occurred in the device.
Contact Oki Data's customer support center.
Restart the device.
%ERRCODE%: Error %FATALSTRING1%
Blinks
An error occurred in the device.
Turn the machine off and then on again.
If the same error occurs, turn the machine off
and then on again. If the error is not resolved, or
the same error occurs again, contact Oki Data's
customer support center.
Document Jam
Please open the scanner unit and the ADF
cover.
Please see Help for details.
Blinks
A document jam occurred.
Open the ADF cover, and then remove the
jammed paper.
Lamp Error. Please call service.
<%CODE%>
Please see Help for details.
Blinks
Indicates that the lamp error is occurred.
This message is displayed because of the light
intensity of lamp is weaker.
Contact Oki Data's customer support center.
%TRAY% missing.
Please see Help for details.
Lights up A paper cassette is not in the indicated tray.
Insert the paper cassette into the indicated tray.
If the cassette is already inserted in the machine,
pull out the cassette and set it again to correctly
locate it.
430
440
Please close %TRAY%.: 430,440
To cancel, select [Cancel]
Blinks
A paper cassette is not in the indicated tray.
Insert the paper cassette into the indicated tray.
If the cassette is already inserted in the machine,
pull out the cassette and set it again to correctly
locate it.
Inspection is required.
%ERRCODE%: SIP Error
Blinks
Processing of scanned image has failed.
Turn the machine off and then on again.
If the error is not resolved, contact Oki Data's
customer support center.
Please call service.
Scanner unit failed to detect printer unit.
Blinks
An error occurred between the scanner and
printer units.
Turn the machine off and then on again.
If the error is not resolved, contact Oki Data's
customer support center.
SIP Firmware Missing.
Please see Help for details.
Blinks
A board failure has been detected.
Turn the machine off and then on again.
If the error is not resolved, contact Oki Data's
customer support center.
Wait a moment.
Network initializing ...
Lights up Changed network settings are being stored.
085
Please change SD Card
Blinks
The contents of the SD memory card cannot be
read normally.
If the same card is used further, the same error
may occur. Replace the SD memory card.
Error
code
Message
<Status>
key
Cause/Remedy
