Loading Paper and Documents
- 71 -
Se
tup
1
Using the Faceup Stacker
Delivers paper with the print side face up.
Note
The faceup stacker is not available in duplex printing.
1
Pull the faceup stacker on the rear side
of the machine and open it toward you.
2
Unfold the faceup stacker.
3
Open the paper support.
Documents
You can use the auto document feeder (ADF) or
the document glass to load documents for
copying, scanning or faxing.
Document Requirements
You cannot load the following documents on the
ADF. Use the document glass instead:
Torn or perforated paper
Curled or rolled paper
Wet paper
Static paper
Carbon-backed paper
Fabrics, metallic sheets or Transparency films
Paper with staples, paper clips, ribbons, or tape
Pasted paper, paper with glue
Glossy paper
Specially coated paper
Keep the followings in mind to avoid damaging
the document glass:
Do not hold a document firmly on the glass when
copying a thick document.
Place hard documents gently.
Avoid loading documents with sharp projections.
Scannable Area
The text or images on the shaded area shown
below are not scanned.
Memo
The arrow in the above drawing indicates the feeding
direction in the auto document feeder, or the scanning
start side on the document glass.
2 mm
2 mm
2 mm
2 mm
