Installing Your Machine
- 18 -
15
While pushing the right side of the toner
cartridge, quickly slide the blue lock (12)
to the left side to lock it.
Slide the locks on all 4 toner cartridges.
16
Close the top cover.
17
Close the scanner unit.
Reference
Please refer to "Loading Paper" P. 66 for information on
how to load paper into the machine.
Turning On and Off Your Machine
Power Supply Conditions
The power supply must meet the following
conditions:
Note
If the power supply is unstable, use a voltage regulator.
The maximum power consumption of this machine is
1170W. Ensure that the power supply is sufficient to
operate this machine.
We do not guarantee the operation where an uninterruptible
power system (UPS) or inverter is used. Do not use an
uninterruptible power system (UPS) or inverter.
Current:
220VAC - 240
VAC
Frequency:
50/60 Hz ± 2%
12
There is a risk of getting
an electric shock and/or
causing fire.
After attachment of a power cord and an earth
wire and removal turn OFF a power supply switch,
be sure to perform them.
Be sure to connect an earth wire to the grounding
terminal of exclusive use. If you can not find the
earth wire, contact the distributor where you have
purchased.
Please do not connect with the ground of a water
pipe, a gas pipe, and a telephone wire, and a light-
ning rod by any means.
Make sure to connect with the ground terminal
before connecting the power cord to the power
supply plug. Additionally, if the earth wire is
detached, please make sure that you remove the
power cord from the electrical socket.
Be sure to perform extraction and insertion of a
power cord with a power supply plug.
Insert a power supply plug to the back of a wall
socket certainly.
Do not take out and insert a power supply plug by
the wet hand.
Install a power cord in the place which is not
stepped on, and do not place a thing on a power
cord.
Do not use the codes tied in a bundle.
Please do not use the damaged power cord.
Do not carry out star-burst connection.
Do not connect this machine and other electric
products to the same wall socket. If it connects
simultaneously with an air-conditioning machine, a
copying machine, shredder, etc. especially, a
machine may incorrect-operate by the electric
noise. When you connect with the same wall
socket unavoidably, please use a commercial noise
filter or a commercial noise cut transformer.
Use the attached power cord and insert it directory
with the ground terminal. Do not use the power
cord for other product for the machine.
Do not use an extended code. When you use it
unavoidably, use the thing more than rated 15A.
Use of an extended code may not operate a
machine normally by AC voltage descent.
During printing, do not shut off a power supply or
do not pull out a power supply plug.
When you use it neither for consecutive holidays
nor a travel for a long time, pull out a power cord.
Do not user attached power cord to the other
products.
WARNING
