Overview of Machine
- 13 -
Se
tup
1
Available Options
The following options are available for your
machine:
Second tray unit (tray 2)
Additional RAM (256 MB or 512 MB)
16 GB SD memory card (MC561 only)
Memo
There is a 4 GB SD memory card inside the MC561dn. If
you expand the memory capacity, please replace with an
optional 16 GB SD memory card.
Reference
For details on how to install the options, refer to "Installing
Options" P. 21.
An SD memory card is used as a storage for spooling when
copying sectors, saving secure print/encrypted print data,
as a storage destination for form data, and for saving auto
delivery and transmission data. For information on secure
print, encrypted secure print, form data, and auto
delivery/transmission data storage functions, please refer
to User's Manual Advanced.
Installation Requirements
Installation Environment
Your machine must be installed in the following
environment:
Note
Be careful of condensation. It may cause a malfunction.
If installing your machine where the humidity of the
surrounding air is less than 30% RH, use a humidifier or
antistatic mat.
Temperature:
10°C~32°C
Humidity:
20%~80% RH(relative
humidity)
Maximum wet
bulb temperature:
25°C
Do not install near high temperature or the fire.
Please do not install in a place from which a
chemical reaction is started (laboratory etc.).
Do not install near the inflammable solution, such
as alcohol and thinner.
Do not install in the place which the small child's
hand reaches.
Do not install in an unstable place (the shaky
stand, leaning place, etc.).
Do not install in a place many humidity, dusty and
the place where direct rays hit.
Do not install in the environment of briny air and
corrosive gas.
Do not install in a place with much vibration.
Do not install in a place where the ventilation hole
of the machine is closed.
Do not place directly on a rug or carpet with long
strands.
Do not install in a closed room with poor
ventilation and circulation.
If you use the machine in a small room for a long
time, please make sure that you ventilate the
room.
Install away from strong magnetic fields and
sources of noise.
Install away from monitors or TVs.
When moving the machine, hold it on both sides,
and move it by slightly letting the back of it fall.
WARNING
CAUTION