Connecting to a Computer
- 34 -
9
Click [
Finish
] to complete the
installation.
- To set a default printer, select the check box of the
driver you want.
- If the optional second unit is installed in the
machine prior to driver installation, click on
[
Driver properties
] and change the set tray.
Note
If the dialog box prompting to restart the computer
appears, click [
Yes
]. The computer automatically
restarts.
Reference
For how to configure the tray settings by the driver,
refer to "Printer Driver Configuration" P. 22.
10
Click [
Start
] > [
Devices and Printers
].
11
Check that the OKI MC561 icon is
displayed.
Right-click the OKI MC561 icon and select one of
the menu item, and then check that all the printer
drivers installed are displayed in the submenu.
12
Remove the "Software CD-ROM" from
the computer.
The installation is complete.
Installing a Printer Driver
(For Mac OS X)
To complete the network connection with a Mac
operating system, install a printer driver on the
computer and set your machine as a network
printer.
Select the protocol for your network connection
from the following:
EtherTalk
Bonjour (Rendezvous for Mac OS X 10.3)
Note
EtherTalk is not supported in Mac OS X 10.6.
Disable the anti-virus software before starting this
procedure.
Using EtherTalk (For Mac OS X
10.5)
When connecting to the network with EtherTalk,
it is necessary to enable EtherTalk and disable
the sleep mode in the machine. Then, install the
driver in the computer.
First, enable EtherTalk in the machine.
1
Ensure that your machine and the
computer are turned on and connected.
Reference
"Connecting an Ethernet Cable" P. 31
2
Press the <
SETTING
> key on the
operator panel.
3
Press the to select [
Admin Setup
],
and press .
4
Enter the administrator password.
The factory default password is "aaaaaa".
5
Select [
Complete
], and press .
6
Press the to select [
Network Menu
],
and press .
7
Press the to select [
Network Setup
],
and press .
8
Press the to select [
EtherTalk
], and
press .
9
Press the to select [
Enable
], and
press .
10
Press the until the top screen is
displayed.
Next, disable the sleep mode in the machine.
1
Press the <
SETTING
> key on the
operator panel.
2
Press the to select [
Admin Setup
],
and press .
3
Enter the administrator password.
The factory default password is "aaaaaa".
4
Select [
Complete
], and press .
OK
OK
OK
OK
OK
OK
OK
OK