Basic operations
- 94 -
10
Press «CANCEL» to return to the standby screen.
For the MP tray
1
Check that "Ready To Print" appears on the display.
2
Press the scroll button ▼ on the operator panel several times to select [Menus], and then press
«OK».
3
Select [Tray Configuration], and then press «OK».
4
Select [MPTray Config], and then press «OK».
5
Select [Media Size], and then press «OK».
6
Press ▲ or ▼ to select the size of the paper to be loaded, and then press «OK». Check that [*] is
displayed to the left of the selected setting, and then press «BACK».
7
Press ▼ to select [Media Type], and press «OK».
8
Press ▲ or ▼ to select the type of the paper to be loaded, and then press «OK». Check that [*]
is displayed to the left of the selected setting, and then press «BACK».
9
Press ▼ to select [Media Weight], and then press «OK».
10
Press ▲ or ▼ to select the type of the paper to be loaded, and then press «OK». Check that [*]
is displayed to the left of the selected setting, and then press «BACK».
11
Press «CANCEL» to return to the standby screen.
About values to be set
Refer to the following table for settings in the case of plain, partially printed paper and colored paper.
Values to be set on the operator panel
Media type
Media weight
Plain
60 ~ 64 g/m
2
paper: Light
65 ~ 74g/m
2
paper: Medium Light
75 ~ 87g/m
2
paper: Medium
88 ~ 105 g/m
2
paper: Medium Heavy
106 ~ 120g/m
2
paper: Heavy
121 ~ 162g/m
2
paper: Ultra Heavy 1
163 ~ 220g/m
2
paper: Ultra Heavy 2