Management of this machine
- 210 -
7
Press ▼ for eight times to check that "2" is displayed,
and then press «OK».
8
Input the remaining characters by the same procedure.
9
Press «OK» again to complete inputting the admin password and display [Admin Setup].
Changing the admin password
The admin password can consist of 1 to 32 digits.
The following characters can be used for the admin password.
Upper-case letters
Lower-case letters
Digits
Symbols: [Space] ! " # $ % & ' ( ) * + ,
-
. / : ; < = > ? @ [ ¥ ] ^ _ ` { | } ~
Be sure to write down the password you set just in case you forget.
If you forget the changed password, you cannot change [Admin Setup] or [Boot Menu].
To reset the admin password, the charged service by maintenance staff may be necessary.
This section describes how to change the factory default admin password as an example.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power saving mode, press «OK» to restore.
2
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and then
press «OK».
3
Input the factory default admin password.
Inputting the factory default admin passwords
(P.209)