Home
/
Oki
/
COREFIDO B822dn
/
User Manual

Oki COREFIDO B822dn, User Manual, Page: 310 / 453

Share

Page: 310 / 453

Oki COREFIDO B822dn User Manual Download Page 310

Maintenance

- 310 -

Service life and replacement cycle of consumables

Toner cartridge

How to identify toner cartridges

There are the following types of toner cartridges. You can identify by the letters printed on the toner cartridge.



ST: Starter toner cartridge (which was installed when you purchased the machine.

）



6K: Toner cartridge



AK: Toner cartridge (for B842 only)

The number of printable sheets varies with the type of toner cartridge.

List of consumables, maintenance parts, options and paper

(P.447)

Service life of the toner cartridge

To check the remaining toner amount, select [Configuration] - [Supplies Life] - [Toner] on the operator panel.

Replacement cycle of the toner cartridge

When the time for replacement is approaching or has arrived, the following message appears on the display.

When the time for replacement is

approaching

→

When the time for replacement has

arrived

Displayed message

Toner Low.

→

Install Toner. Replace With A New Toner
Cartridge.

Response to the

message

Please prepare a new toner cartridge.

→

Replace the toner cartridge with a new one.

State of this machine

Printing is possible, but the remaining toner
is low.

→

The toner cartridge is empty. Printing stops.

About 300 pages can be printed from when the time for replacement is approaching to when the time for

replacement has arrived. (reference value for A4_ISO pattern_simplex printing)



Printing quality will decline after the toner cartridge stays unpacked for one year or longer. Therefore, prepare a new

toner cartridge.



Use genuine OKI consumables for optimum performance.



Failures caused by using non-genuine consumables may void the warranty or maintenance contract. (The use of

non-genuine consumables will not necessarily cause failures, but please fully take notice of such usage.)



Replace the toner cartridge immediately when a message indicating replacement of the toner cartridge is displayed

and printing has stopped.
If you repeatedly open and close the front cover so that you can continue printing temporarily, a failure may be caused
or the print quality may be degraded.
In addition, after a certain period of time, printing will be disabled even if you open and close the front cover. (The
printable period of time varies with the usage condition.)

Replacing toner cartridges

(P.312)

«
...
308
309
310
311
312
...
»

Summary of Contents for COREFIDO B822dn






































































































































































































































































































































































































































































Reviews:

No comments