Changing settings from the operator panel
- 115 -
Item
Factory
default
setting
Description
System
Adjust
Power Save Time
1 minute
Sets the time to switch to power saving
mode.
Value range: 1 minute, 2 minutes, 3 minutes,
4 minutes, 5 minutes, 10 minutes, 15
minutes, 30 minutes, and 60 minutes
Sleep Time
1 minute
Sets the time to shift from power saving
mode to sleep mode.
Value range: 1 minute, 2 minutes, 3 minutes,
4 minutes, 5 minutes, 10 minutes, 15
minutes, 30 minutes, and 60 minutes
Auto Power Off Time
4 hours
Sets the time to turn off the power
automatically after entering standby mode.
Value range: 1 hour, 2 hours, 3 hours, 4
hours, 8 hours, 12 hours, 18 hours, and 24
hours
Clearable Warning
OK button
Sets the timing to clear the recoverable error
display.
Auto Continue
Off
Sets whether or not to automatically restore
this machine when a memory overflow or
tray request occurs.
Manual Timeout
60 seconds
Sets the waiting time for loading the paper
when you print with [Feed paper individually]
checked in the printer driver.
Value range: Off, 30 seconds, and 60
seconds
Timeout Injob
40 seconds
Sets the time from loss of the data receipt
(canceled by PostScript) until force-printing.
Value range: Off, 5 seconds, 10 seconds, 20
seconds, 30 seconds, 40 seconds, 50
seconds, 60 seconds, 90 seconds, 120
seconds, 150 seconds, 180 seconds, 210
seconds, 240 seconds, 270 seconds, and
300 seconds
Timeout Local
40 seconds
Sets the time to keep each port open after
printing. (Excluding the network)
It can be set from 0 seconds to 300 seconds
in increments of 5 seconds.
Timeout Network
90 seconds
Sets the time to keep the network port open
after printing.
It can be set from 0 seconds to 300 seconds
in increments of 5 seconds.
Jam Recovery
ON
Sets whether to reprint pages not printed
due to a paper jam after the paper jam is
cleared.
When [Off] is selected, the printing process
including pages missed due to the paper jam
will be canceled.
Error Report
Off
Sets whether to print an error report when an
internal error occurs.
Hex Dump
Execute
Prints the data received from the PC in
hexadecimal dump. To exit this mode, turn
off the power.