Management of this machine
- 222 -
4
Click the Menu button on the upper right corner, and then select [Printer management] - [Email
Alert].
5
Select [Enable] on the displayed screen.
6
Set the mail address allocated to this machine in [Device E-mail Address].
7
Input the e-mail server name or the address of e-mail server in [SMTP Server].
8
Set appropriate values for other setting items if necessary.
9
Input the e-mail address to receive notifications in [Notification Email Address].
10
Click [SET] for the e-mail address you input.
If you want to apply the notification condition to another address, select the copy source, and then click
[Copy].
11
Configure the settings following the on-screen instructions.
When you select [Upon occurrence of an event], an error is notified just once.
When you select [Periodically], an error is notified periodically until it is cleared.
12
Click [Apply].
If no notification target error occurs, the notification e-mail will not be sent.
Using SNMPv3
By using the SNMP manager that is compatible with SNMPv3, the management of this machine can be
encrypted with SNMP.
1
Open the web page of this machine.
(P.213)
2
Log in as an administrator.
Logging in as an administrator
(P.214)
3
Select [Network Setup].
4
Click the Menu button on the upper right corner, and then select [Protocol] - [SNMP].
5
Configure the settings following the on-screen instructions.
6
Click [Apply].
You can use a commercially-available SNMP manager to verify and change the settings of this machine. For the MIB
of this machine, refer to the supplied DVD, and check the MIB definition file in [Misc] - the [MIB Files] folder.
Using IEEE802.1X (Wired LAN)
This machine is compatible with IEEE802.1X authentication. IEEE802.1X authentication is possible after
IEEE802.1X authentication on the web page of this machine is enabled and the authentication switch is
connected.