Changing settings from the operator panel
- 116 -
Item
Factory
default
setting
Description
Print Adjust
Print Position
Adjust
MPTray
X Adjust
0.00millimete
r
Adjusts the printing position of each tray.
Tray2/3/4 is displayed when the expansion
tray is mounted.
X Adjust: Corrects the position of the
overall print image perpendicularly over
the direction of paper travel.
Value range:
±
2.00 mm (in increments of
0.25 mm)
Y Adjust: Corrects the position of the
entire print image along the paper
travel direction.
Value range:
±
2.00 mm (in increments of
0.25 mm)
Duplex X Adjust: Corrects the position
of the print image perpendicular to the
paper travel direction for printing on the
face side during duplex printing (when
printing on the print side of paper fed
from the duplex unit).
Value range:
±
2.00 mm (in increments of
0.25 mm
)
Duplex Y Adjust: Corrects the position
of the print image along the paper
travel direction for printing on the face
side during duplex printing (when
printing on the print side of paper fed
from the duplex unit).
Value range:
±
2.00 mm (in increments of
0.25 mm)
Y Adjust
0.00millimete
r
Duplex X
Adjust
0.00millimete
r
Duplex Y
Adjust
0.00millimete
r
Tray1
X Adjust
0.00millimete
r
Y Adjust
0.00millimete
r
Duplex X
Adjust
0.00millimete
r
Duplex Y
Adjust
0.00millimete
r
Tray2
X Adjust
0.00millimete
r
Y Adjust
0.00millimete
r
Duplex X
Adjust
0.00millimete
r
Duplex Y
Adjust
0.00millimete
r
Tray3
X Adjust
0.00millimete
r
Y Adjust
0.00millimete
r
Duplex X
Adjust
0.00millimete
r
Duplex Y
Adjust
0.00millimete
r
Tray4
X Adjust
0.00millimete
r
Y Adjust
0.00millimete
r
Duplex X
Adjust
0.00millimete
r
Duplex Y
Adjust
0.00millimete
r
Paper Black Setting
0
Used for fine adjustment in case of
noticeable blur etc. in the print results during
printing when [Plain] is selected in [Media
Type]. Decreases the value if printing such
as scattered or snow-covered printing
occurs in high-density printing. Increases the
value if printing is blurred. Adjusts within the
range of
±
2.