Troubleshooting
- 430 -
The density differs at two ends of the paper
Cause
Solution
Reference
After narrow paper (i.e. width A in
the figure) had been printed on
repeatedly, wide paper was printed
on.
If this occurs when you load the paper in landscape
orientation, try printing with the paper loaded in portrait
orientation.
(P.82)
You can reduce the occurrence of a difference in density by
changing the settings of this machine as follows.
Press the scroll buttons on the operator panel several times
to select [Menus] - [Print Adjust] - [Paper Black Setting], and
change the setting to [-1].
It may take some time to improve the problem. If the
problem does not improve even after the setting is changed,
leave this machine idle for a while.
(P.113)