Changing settings from the operator panel
- 124 -
Item
Factory
default
setting
Description
Time Zone
+9:00
Sets the GMT time zone.)
Value range: -12:00 ~ +13:00 (in increments
of 15 minutes)
Daylight Saving
Off
Sets the daylight saving (daylight saving
time).
Setting method
Manual
Setup
Selects how to set the time.
SNTP Server (Primary)
(Blank)
Sets the SNTP server used to set the current
date and time. Up to 64 characters can be
used.
Displayed when [Auto Setup] is selected as
the setting method.
SNTP Server(Secondary)
(Blank)
Time Setup
2001/01/01
00:00:00
The time is set at factory delivery. Change
the date and time if necessary.
Displayed when [Manual Setup] is selected
as the setting method.
Power Setup Auto Power Off
Auto Config Sets the actions of Auto Power Off.
[Auto Config]: Auto Power Off does not work
for network connection (wired/wireless).
[Enable]: Auto Power Off works regardless
of the connection method.
[Disable]: Auto Power Off does not work.
Power Save Setting
Mode1
Set the switching menu between the power
save mode and low temperature standby
mode.
[Mode1]: Sets it to the power save mode.
Power consumption in the power saving
mode is lower than that in Mode2.
[Mode2]: Sets it to the low temperature
standby mode. Print start in the power
saving mode is faster than that in Mode1.
Tray Setup
Unit of Measurement
millimeter
Sets the unit of measurement for the custom
size (mm/inch).
Default Paper Size
A4
Sets the default paper size of a custom size.
Others Setup Paper Feed
Roller
Counter
Clear
MP Tray Clear
Execute
Clears the counter after the paper feed roller
of the MP tray is replaced.
Tray1 Clear
Execute
Clears the counter after the paper feed roller
Tray1 is replaced.
Tray2 Clear
Execute
Clears the counter after the paper feed roller
Tray2 is replaced.
Tray3 Clear
Execute
Clears the counter after the paper feed roller
Tray3 is replaced.
Tray4 Clear
Execute
Clears the counter after the paper feed roller
Tray4 is replaced.
Flash
Memory
Setup
Initialize
Execute
Initializes the flash memory.
Format Partition
PCL
Formats the specified partition of a flash
memory.
Job Log
Setup
Save Job Log
Disable
Sets whether to save a log of print data.
Clear Job Log
Execute
Clears the log of saved print data.
Displayed when [Save Job Log] is enabled.
Security
Access Control
Disable
Sets whether to enable access control.