Oce TDS400, User Manual

Page: 78 / 210

78 Océ TDS400 Digital Multifunctional System User Manual
2
From the ‘File’ menu select ‘Properties’.
3
Check the ‘Locked’ check box.
4
Click ‘OK’ to accept the destination settings.
The destination properties are now locked.
Note:
This option is only available if you are logged on as a Key operator (see
chapter 9, ‘Océ Print Exec® LT Web’ on page 133).
▼
▼ ▼
▼
Unlock a destination
1
Select a destination.
2
From the ‘File’ menu select ‘Properties’.
3
Uncheck the ‘Locked’ check box.
4
Click ‘OK’ to accept the destination settings.
The destination properties are now unlocked.
Note:
This option is only available if you are logged on as a Key operator (see
‘Océ Print Exec® LT Web’ on page 133).
▼ ▼ ▼ ▼
Delete a destination
1
Select a destination.
2
Open the ‘File’ menu and select ‘Delete’ or click the ‘Delete’ button on the
toolbar (see figure 21).
[21] ‘Delete’ button on the toolbar
The selected destination is deleted.
Note:
This option is only available if you are logged on as a Key operator or
as a Repro operator.
Note:
You are not able to delete the last destination.
▼
▼ ▼
▼
Define file name
1
Select a destination.
2
From the ‘File’ menu select ‘Properties’.
The ‘Destination properties’ screen appears (see figure 20 on page 77).
3
Enter a name in the ‘Base name’ textbox.
Note:
The ‘Base name’ may contain ‘###’ for automatic file naming. The
‘###’ will be replaced by an ascending number. You may place as many
dots in the ‘Base name’.
4
Check or uncheck the ‘Add appropriate file extension’ check box to add or
respectively leave out an appropriate file extension. The file extension can be
set in the Settings Editor.
5
Click ‘OK’ to accept the settings.