Oce TDS400, User Manual

Page: 46 / 210

46 Océ TDS400 Digital Multifunctional System User Manual
The display
The display shows the feedback about the scan/copy job status (see table
below) in normal mode. In off-line mode it shows the off-line menu (see
page 64) and (see page 72))
.
Status messages
Status Messages Explanation
Scanner ready
The scanner is prepared to scan.
+ = add
= close
Add an original to the set and press the start button .
After the last scan of the set, remove the original and press
the start button
to close the set
.
Connecting..... There is no communication between the controller and the
scanner.
Wait until the there is communication.
Scanner asleep
The scanner is in low power mode.
Scanner running The scanner scans.
Please wait
The scanner downloads the languages.
Remove original
Press <cancel>
There is an original on the table while you turn on the scan-
ner.
The message appears if you pressed the ‘cancel’ button
while you scan.
Remove the original.
Press cancel.
Original too long
Press <cancel>
Use an original shorter than 15 meter.
Wrong orig. type
Press <cancel>
This message shows when you select ‘Background compen-
sation’ and ‘Blueprint’ as original.
Press cancel.
Set closed
You closed the copy set.
Reset scanner Turn the scanner on and off.