Oce TDS400, User Manual

Page: 168 / 210

168 Océ TDS400 Digital Multifunctional System User Manual
Note:
Make sure that the cover is closed correctly, to make sure correct
original move.
6
Press the ‘cancel’ button.
How to clear a paper jam
If a jam occurs a message appears on the operator panel. If a paper jam occurs,
check if:
■
The roll is loaded correct and the media is fed as indicated.
■
The correct media is used (see ‘List of available material types and sizes’ on
page 180).
■
No scraps of material are blocking the paper path
▼ ▼ ▼ ▼
Clear a jam in the material feed section
1
Turn off the printer.
2
Open the correct roll compartment.
Note:
One compartment can be open at a time.
3
Lower the feed table, use the two catches on the front underneath the feed table
(see figure 74).
[74] Lower the feed table
4
Remove the jammed material.
5
Close the feed table.
6
Close the roll compartment.
7
Turn on the printer.
Note:
If you can not clear the paper jam by opening the feed table than open
the fusing section (see ‘How to solve a jam in the fuser section’ on page 169).