Oce TDS400, User Manual

Page: 109 / 210

Océ Power Logic®: System Control Panel 109
User operations
The System Control Panel allows you to perform the following operations:
■
Make a demo plot
■
Print your system configuration
■
Clear the system
■
Shut down the system
▼
▼ ▼
▼
Make a demo plot
1
Select the Demo plot option in the System menu.
A demo plot is made on the printer.
▼
▼ ▼
▼
Print your system configuration
1
Select the Print settings option in the System menu.
A list is printed of the current settings on the Océ Power Logic® Controller.
▼ ▼ ▼ ▼
Clear the system
1
Select the Clear system option in the System menu to delete all jobs.
You can use this option in case of a corrupt job which can not be deleted with
the help of the Queue Manager.
Note:
This option is only available in repro operator, key operator and
system administrator mode. In anonymous user mode it is not possible to
clear the system.
▼
▼ ▼
▼
Clear the system (on printer panel)
1
Press the ‘on line’ button to put the printer off line.
2
Select the ‘System’ item with the or button.
3
Press ‘next/select’ to enter the ‘System’ menu.
4
Select ‘Clear setmem’ with the or button.
5
Enter password
6
Press ‘next/select’ to enter the ‘Clear setmem’ menu.
7
Select the ‘on’ or ‘off’ with the or button.
8
Press ‘on line’ to put the printer on line again.
▼
▼ ▼
▼
Shut down the system
1
Select the Shut down option in the System menu to shut down the system.
Note:
This option is only available in repro operator, key operator and
system administrator mode. In anonymous user mode it is not possible to
shut down the system.