Oce TDS400, User Manual

Page: 2 / 210

Copyright
Océ-Technologies B.V. Venlo, The Netherlands © 2001
All rights reserved. No part of this work may be reproduced, copied, adapted,
or transmitted in any form or by any means without written permission from
Océ.
Océ-Technologies B.V. makes no representation or warranties with respect to
the contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose.
Further, Océ-Technologies B.V. reserves the right to revise this publication and
to make changes from time to time in the content hereof without obligation to
notify any person of such revision or changes.
Edition 1.2
Océ-Technologies B.V.
GB
This manual contains a description of the Océ TDS400 and the copying that
can be done with it. The introduction (chapter 1) contains a general description
of the working methods for using the copier and it is recommended that you
read at least this chapter.
Trademarks
Products in this manual are referred to by their trade names. In most, if not all
cases, these designations are claimed as trademarks or registered trademarks of
their respective companies.
Safety information
This manual contains the following safety information:
■
Appendix B lists ‘Instructions for safe use’. You are advised to read this
information before you start to actually use the copier.
Technical safety
information such as safety data sheets can also be found in appendix B.
■
Where applicable, cautions and warnings are used throughout this manual to
draw your attention to safety precautions to be taken.
Internet
Check Océ on the internet at www.oce.com for:
■
the latest drivers
■
the latest user manuals
■
product development