Oce TDS400, User Manual

Page: 37 / 210

Use the Océ TDS400 to print 37
System menu
To enter the System menu you need a password. The password for the System
menu
is: stops’ .
Clear set memory
The set memory indicates the available memory. If an error occurs, for example
the set memory reaches its limits, you must clear the set memory.
▼
▼ ▼
▼
Clear set memory
1
Press the ‘on line’ button to put the printer off line.
2
Select the ‘System
’
item with the or button.
3
Press ‘next/select’ to enter the ‘System’ menu.
4
Enter the password to get access.
5
Select the ‘Clear setmem’ item with the or button.
6
Press ‘next/select’ to enter the ‘Clear setmem’ menu.
7
Select ‘Yes’or ‘No’ with the or button.
8
Press ‘next/select’ to confirm the setting.
9
Press ‘on line’ to put the printer on line again.
10
Turn ‘off’ and ‘on’ the controller.
Diagnostic mode
The Diagnostic mode is only meant for the Océ service technician.