manualshive.com logo in svg

Oce TDS400, User Manual

Share
Download
Oce TDS400 User Manual Download Page 191

Safety information

191

Safety data sheet Océ B5 toner

continued on the next page

MATERIAL SAFETY DATA SHEET

Number

E-199-a-UK

(93/112/EEC and ISO 11014-1)

Date

October 1997

Page

1 of 2

Océ B5 Toner

1. Product and company identification

Product name

Oc  B5 Toner

Packing

Polyethylene bottle, contents 0,45 kg/1.1 lb

Company

Oc  (UK) Ltd.

Address

Langston Road, Loughton, Essex IG10 3SL

Telephone

0181-508 5544 (contact product safety coordinator)

Telefax

0181-508 6689

2. Composition / information on ingredients

3. Hazards identification

In a toner dust cloud the formation of an explosive dust-air mixture is possible.
Toner dust may cause discomfort for the eyes and respiratory tract, in the same manner as inert nuisance dust.
To our knowledge, with due observance of the recommended exposure limit and of normal hygiene this product presents no health hazard
in normal use.

4. First aid measures

Eyes contact

Rinse with plenty of water.

Skin contact

Wash with cold water and soap.

Inhalation

Clean nose, mouth, throat. Cough up. Fresh air.

Ingestion

Rinse mouth with water. If large quantity swallowed seek medical advice.

For any medical advice take along this material safety data sheet.

5. Fire fighting measures

Extinguishing media

Dry chemical, carbon dioxide, water spray (fog), foam

Special fire fighting precautions

N.A.

Hazardous products of decomposition

N.A.

6. Accidental release measures

Spills can be cleaned with a vacuum cleaner or a damp rag. Do not use warm water, because this makes the powder soft and sticky.

7. Handling and storage

Keep bottle tightly closed to prevent dust formation. Handle carefully. Avoid breathing dust.
No special technical measures for storage.

8. Exposure controls / personal protection

No special technical measures. No personal protective equipment needed.
Industrial hygiene: after skin contact wash with cold water and soap.
Threshold Limit Value for:

* nuisance dust

10 mg/m

3

* carbon black

3,5 mg/m

3

* amorphous silica

10 mg/m

3

Ingredients

CAS No.

ClassiÞcation

Weight %

Poly ester resin

170831-75-1

25-50

Pheno xy resin

PMN P-95-461

25-50

Iron o xide

1317-61-9

10-25

Carbon b lack

1333-86-4

1-5

Amor phous Silica

68611-44-9

<1

Pigment

<1

Summary of Contents for TDS400



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands