Oce TDS400, User Manual

Page: 77 / 210

Use the Océ TDS400 to Scan 77
The following dialogue box appears (see figure 20):
[20] ‘Destination properties’ window
3
Enter a name for the destination in the ‘Name’ text box. This name also
appears on the scanner operator panel in the ‘Destination’ menu.
4
Select a destination type from the ‘Type’ drop-down list box.
Select between:
■
File Transfer Protocol (FTP),
■
Server Messages Block (SMB),
■
local store in the temporary store on the controller.
5
Enter the name of the system you want to scan your files to in the ‘System’ text
box.
Note:
Names in Japanese can only be entered for remote destinations in
SMB.
6
Enter a path of the target folder in the ‘Path’ text box, or click the ‘Browse’
button to select the path. The path selection is only available if you select ‘On
the controller’ as ‘Type’.
7
Enter, if needed, a user name for the network destination in the ‘User name’
textbox.
8
Enter, if needed, the correct password for the network destination in the
‘Password’ text box.
9
Click ‘OK’ to accept the destination properties.
Note:
You can create six destinations.
A key operator can select if a destination can be modified by an anonymous
user. This is done by locking and unlocking a destination.
▼ ▼ ▼ ▼
Lock a destination
1
Select a destination.