Oce TDS400, User Manual

Page: 45 / 210

Use the Océ TDS400 to copy 45
The buttons
The input button
Select a single original or a set originals.
The output button
Select a copy or a file (scan to file) as your output.
The extra button
This button allows you to enter the ‘extra’ mode of the
scanner and return to the normal mode. Set the properties for the original, the
scanned files and for the scanner in the ‘extra’ mode.
The browse buttons (left
,
right )
Move in one level of the menu structure
as the display shows. Browse the preset zoom values.
The browse buttons (up , down )
Move between the levels of the menu
structure as the display shows. Adjust the zoom value with an accuracy of 1
percent.
The confirm button
Confirm the current setting in the menu structure. If you
press the confirm button a second time in the current menu item, you restore
the previous setting.
The strip button
Press this button to add or to remove a ‘leading’ or a ‘trailing’
strip. The icon flashes. Use the browse buttons
(left
,
right , up , down )
to
change the value. The icon remains on if you press another settings button and
select a different value than the default value.
The cancel button
Press this button one time to set the copy counter to the
default value. Press this button twice to change all settings to their default
values. The scan stops if you press this button.
The - and + buttons
Change the number of copies.
The start button
Press the green start button to start the scan or to
restart the copy process.
The zoom button
Enters the zoom mode. The icon flashes. Use the browse
buttons (left
,
right ) to browse the preset zoom values. Use the browse
buttons (up , down ) to adjust the zoom value with an accuracy of 1 percent.
The exposure button
enters the exposure mode. The icon flashes. Use the
browse buttons to change the exposure value.
The media button
Select roll 1, roll 2 or manual feed. The equivalent icon is
on.