Oce TDS400, User Manual

Page: 157 / 210

Printer supplies and scanner maintenance 157
5
Align the roll with the appropriate lines on the roll holder while you press the
knob.
Place the roll holder with the material in the lower paper compartment (see
figure 64).
da
[64] Reposition the roll in the lower paper drawer
6
Feed the material between the input guide plates against the rollers.Turn the
rollers until the material is visible (see figure 65). Also refer to the sticker
inside the drawer.
[65] Feed the material
If you want to cut the paper to get a straight leading edge refer to ‘Cut media’
on page 30.
Otherwise continue with the next step.
7
Close the lower paper compartment.
8
Press the button ‘on line’.