Oce TDS400, User Manual

Page: 68 / 210

68 Océ TDS400 Digital Multifunctional System User Manual
Settings to scan
Press the ‘Extra’ button on the scanner operator panel to access the settings to
make a scan. The following options are available in the ‘File’ menu:
Destination
You can store your scan either in the temporary storage on the
controller or you can store it on a network destination. You can define a
maximum of six destinations in the Scan Manager application. You can select
one of these destinations on the scanner operator panel.
Check print
A Check print is a print from the scanned original. You can turn
the check print on or off.
File resolution
The Océ TDS400 Scan Logic® option can scan three
resolutions: 200, 300 or 400 dots per inch (DPI). The higher the resolution, the
better the image quality. Higher resolution also causes larger sizes of files.
File format
To define the internal order of the scanned files, select between
TIFF (Tagged Image File Format), CALS-I (Continuous Acquisition and Life
Cycle support), or PDF (Portable Document Format).
Optimise size
Select this option to decrease the size of the file or to get good
quality.
Set the scan size In the ‘Original’ menu.
Destination
You can store your scan either in the temporary store on the controller or on a
network destination. You can define up to six destinations in the Scan Manager
application. On the scanner operator panel you can choose one of these
destinations.
▼
▼ ▼
▼
Select a destination
1
Press the ‘extra’ button.
2
Select ‘Destination’ with he or button.
3
Press the button, to enter the ‘Destination’ menu.
4
Select the needed ‘Destination’ with he or button.
5
Press the confirm button.