Oce TDS400, User Manual

Page: 155 / 210

Printer supplies and scanner maintenance 155
6
Place the roll holder with the material in the drawer (see figure 60).
[60] Reposition the roll
7
Feed the material between the input guide plates against the rollers.
8
Turn the rollers until the material is visible (see figure 61). Also refer to the
sticker inside the drawer.
[61] Feed the material
9
If you have inserted a roll with another material or with a different width, you
have to program the correct width and material type (refer to ‘Media type and
size on the printer’ on page 27).
If you want to cut the paper to get a straight leading edge refer to ‘Cut media’
on page 30.
Otherwise continue with the next step.
10
Close the drawer.
11
Press the button ‘on line’.