Oce im4530, Printing Manual

Page: 237 / 386

Setting Up Print Options 235
For im2830 Series
1) Drawer
This sets whether or not the optional drawers or LCF is installed.
The selections vary depending on the equipment model.
For im4530 Series:
- None — Select this when neither drawer nor LCF is installed.
- LCF — Select this when the LCF is installed.
- Drawer3 — Select this when Drawer 3 is installed.
- Drawer3 & Drawer4 — Select this when Drawer 3 and Drawer 4 are installed.
For im2830 Series:
- Drawer 1 — Select this when the Drawer 1 is installed.
- Drawer 1 & LCF — Select this when the Drawer 1 and LCF are installed.
- Drawer 1 & 3 — Select this when the Drawer 1 and Drawer 3 are installed.
- Drawer 1,3 & 4 — Select this when the Drawer 1, Drawer 3 and Drawer 4 are installed.
- Drawer 1 & 2 — Select this when the Drawer 1 and Drawer 2 are installed.
- Drawer 1,2 & LCF — Select this when the Drawer 1, Drawer 2 and LCF are installed.
- Drawer 1,2 & 3 — Select this when the Drawer 1, Drawer 2 and Drawer 3 are installed.
- Drawer 1,2,3 & 4 — Select this when the Drawer 1, Drawer2, Drawer 3 and Drawer 4 are
installed.
LCF is not available for some countries or regions.
2) Finisher
This sets whether or not the optional finisher is installed.
The selections vary depending on the equipment model.
For im4530 Series:
- None — Select this when finisher is not installed.
- Hanging Finisher — Select this when the Hanging Finisher is installed.
- Finisher (Type A) — Select this when the Finisher (Type A) is installed.
- Finisher (Type B) — Select this when the Finisher (Type B) is installed.
- Saddle Stitch Finisher — Select this when the Saddle Stitch Finisher is installed.
- Job Separator — Select this when the Job Separator is installed.
- Offset Stacker — Select this when the Offset Stacker is installed.
For im2830 Series:
- None — Select this when finisher is not installed.
1
3
5
6
7
9
8
10
13
12
15
14
11
2
4