Oce CPS900, User Manual

Page: 84 / 138

84 Chapter 3 Print Jobs on the Océ CPS900®
Use the special feeder
Use the special feeder
Introduction
The special feeder is a separate paper feed option that the operator uses
independently or in combination with the four paper trays in the paper compartment.
This option allows the Océ CPS900
®
to accept paper that does not come out of the
paper trays. The operator manually feeds one sheet at a time.
Note: The special feeder accepts minimum A4/Letter and maximum A3/Tabloid size
paper (minimum paperweight 75 g/m
2
or 20 lb.bond, maximum paper weight 250
g/m
2
or 140 lb. index). You cannot use full bleed materials in the special feeder
When to do
Use the special feeder to insert single sheets of paper into a job. The special feeder
can be used in case you have no access to the paper trays or if you do not want to
change the configuration of the paper trays.
How to use the special feeder
1.
Edit the job in the mailbox or send a print job that includes 'Special feeder' to the
printer.
2.
Define the settings for 'Print', 'Sheet'.
3.
Indicate 'Special feeder'.
4.
Adjust the 'Size', 'Type', 'Weight' and 'Medium'.
5.
Enter the number of prints and press the Start key .
Result
The operator panel displays the message 'Load special feeder'. The operator
manually puts the paper into the special feeder and the job starts.