Oce CPS900, User Manual

Page: 61 / 138

61
Manage print jobs on the Océ CPS900®
Manage print jobs on the Océ CPS900
®
Introduction
You can set the destination of the print jobs in three different places.
1.
In the 'Destination' tab of the Océ printer driver.
2.
In a workflow application via the controller such as Command Workstation.
3.
In the 'Workflow' settings on the operator panel of the Océ CPS900
®
.
Note: A situation can arise in which the destination settings contradict eachother.
Print job management for the key operator on the Océ CPS900
®
Only the key operator of the Océ CPS900
®
can change the settings for the 'Workflow'
in the 'KOS editor' (see "Access the KOS editor" in the Configuration and
maintenance manual). The workflow settings overrule the destination settings
defined through the controller and the Océ printer driver.
The key operator must select one of the four options.
[27]
[27] Key operator options on the operator panel
Option Description
'Automatic' All print jobs from the controller go into the job queue.
'Mailbox' All print jobs go into the mailbox, including the automatic
print (AP) jobs from the controller.
'Automatic and
Mailbox' Automatic print (AP) jobs go into the job queue and
interactive print (IP) jobs go into the mailbox.
'None' The Océ CPS900
®
cannot receive any jobs.