Oce CPS900, User Manual

Page: 123 / 138

123
Problem solving
Problem solving
Introduction
The table below lists some conditions that can occur during operation of the Océ
CPS900
®
.
You can resolve these problems without a service call.
Problem solving table
[50]
[50] Problem Solving Table (1 – 2)
Problem/message Solution
“First set ready.
Please check the
result.“ You have selected the option to check the first set. When the
first set is completed, you can check the result.
If the result is satisfying, you can Approve or Reject the job
(Approve to continue the job).
“Import busy.
Cannot export.“ The job is sent to the queue, but not yet downloaded
completely.
Wait a few seconds, the job can be started when the download
is ready.
Job in the queue
displays an error
.
A run-time contradiction occurred (see 'How to handle
contradictions on the Océ CPS900
®
.' in the Job manual).
Job in the queue
displays a warning
.
A start contradiction occurred (see 'How to handle
contradictions on the Océ CPS900
®
.' in the Job manual).
“Job on hold.“ To print this job, open the job queue and release the job.
“Not enough
memory for test
chart generation.“ Before the setting 'KOS adjustments' is activated, all the jobs
in the job queue must be removed. Avoid interference from
automatic print jobs sent from the controller. Select the
'Suspend printing' setting on the controller.
Operator panel
light is dimmed. The printer is in low power mode (see 'The power modes of
the Océ CPS900
®
' in the Job manual).
Operator panel
light is off. The printer is in sleep mode (see 'The power modes of the
Océ CPS900
®
' in the Job manual).
Out of toner. Add toner (see 'Add the toner' in the Configuration and
maintenance manual).
Paper jam
occurred. Follow the detailed instructions on the screen of the operator
panel.