Obihai OBi110, Administration Manual

Page: 164 / 202

Copyright 2010-2012 Obihai Technology, Inc. 164
User Settings Features of the OBi Device
Speed Dial Numbers
Each OBi device supports 99 speed dial numbers. The 99 speed dial slots are numbered from 1 to 99 and are invoked by
dialing a 1 or 2-digit number corresponding to the slot number. Speed dials may be dialed from the PHONE port or via the
Auto Attendant. Note that the 2-digit numbers “01”, “02”, …, “09” are not admissible; you must dial the 1-digit number “1”,
“2”, …, “9” for slot number 1-9.
Speed dial value can be set using the configuration web page, remote provisioning, or star code (see the Star Code Section
in this document for more details). The value may be a number just like the one you normally dial, with or without any
service access code prefix, such as: **9200112233, **214089991123, 4280913, etc. It may also include explicit trunk
information with the general format TK(number), where TK= SP1, SP2, LI, or PP. For example, PP(ob200112233),
SP2(14089991123), LI(4280913), etc.
If trunk information is not specified in the speed dial entry, OBi device applies DigitMap and OutboundCallRoute when
making the call. Otherwise neither DigitMap nor OutboundCallRoute is applied.
Using Speed Dial Number as Ad Hoc Gateway
If an external gateway does not require authentication, its access number can be stored in one of the 99 speed dial slots to
allow ad hoc direct dialled gateway calls. To do this, the user dials the gateway’s speed dial, followed by a *, followed by the
target number. That is <gateway-speeddial> * <target-number>. For example, the gateway access number
pp(ob200333456) is stored at speed dial 8, and the user can dial 8*14085551234 to call 14085551234 using the given
gateway.
Note: At the present time, only gateways that are accessed with an OBi number can be used this way.
Speed Dial Settings
Speed Dials Parameter Guide: