Obihai OBi110, Administration Manual

Page: 22 / 202

Copyright 2010-2012 Obihai Technology, Inc. 22
*03, Request peer device to loopback media in the next outbound call
*04, Request peer device to loopback RTP packets in the next outbound call
*05, Tell device to periodically redial the last called number until the called party rings or answers
*06, Cancel the last repeat dial request
*07 Redial
*69 Call Return
*81 Block Caller ID (Persistent Mode)
*82 Unblock Caller ID (Persistent Mode)
*67 Block Caller ID (One Time)
*68 Unblock Caller ID (One Time)
*72 Call Forward All (Enter #)
*73 Disable Call Forward All
*60 Call Forward on Busy (Enter #)
*61 Disable Call Forward in Busy
*62 Call Forward on No Answer (Enter #)
*63 Disable Call Forward No Answer
*77 Block Anonymous Calls
*87 Unblock Anonymous Calls
*56 Enable Call Waiting
*57 Disable Call Waiting
*78 Do Not Disturb – Turn On
*79 Do Not Disturb – Disable
*66 Repeat Dial
*86 Disable Repeat Dial
*74 Speed Dial Set-Up (Enter SD No. [1-99] then Tel No. + #) ∞
*75 Speed Dial Read-Back (Enter SD No.)
*76, Clear a Speed Dial
*96, Barge In
*98, Blind Transfer
*4711, Use G711 Only on the next outbound call
*4729, Use G729 Only on the next outbound call
*28, Make OBiBT Bluetooth Adapter discoverable for the next 120s (OBI202 only)
∞ Note: Be careful with the Speed Dial Set-Up as this will conflict with the Speed Dials set-up on the OBiTALK portal. The
Speed Dials that are set-up on the OBiTALK portal will always overwrite anything set-up via the phone connected to the OBi.