Obihai OBi110, Administration Manual

Page: 85 / 202

Copyright 2010-2012 Obihai Technology, Inc. 85
Device Update
See the section entitled, “Firmware: OBi Device Update and Management” for details on device firmware updates.
SIP Service Provider Features of the OBi Device
The following section describes the SIP Service Provider features of the OBi device. Up to two SIP accounts (four for
OBi202), or SIP Trunks, can be configured on the OBi. For the purposed of this document and elsewhere on OBi device web
page, documentation and the OBiTALK portal, the term ITSP is used to describe the logical entity providing the SIP Trunk
service to the OBi. ITSP stands for Internet Telephony Service Provider. Please note that when the OBi is used in
conjunction with an IP PBX, the IP PBX would take the place of the ITSP if it is the entity providing the SIP Trunk account
credential and connectivity to the OBi.
Each ITSP configuration is grouped together as an ITSP Profile. We refer to them as ITSP Profile A, B, C
2
, and D
2
respectively..
The SP service account specifics on the other hand are grouped under the heading SP n Service, where n = 1, 2, 3 or 4. An
ITSP Profile includes such parameters as
ProxyServer
,
OutboundProxy
, and
DigitMap
, but does not include
account specific parameters. A SP Service includes account specific parameters such as
AuthUserName
(usually the
phone number of the account),
AuthPassword
,
CallerIDName
, and
X_ServProfile
(which ITSP Profile to
assume). If both SP Service use the same ITSP, then only one ITSP Profile needs to be configured with both SP Services
referred to the same profile.
From the OBi device point of view, the SP n Service using ITSP Profile X is enabled with the following minimal settings:
ITSP Porfile X – SIP:: ProxyServer = Not Blank
SP n Service:: Enabled = Yes
SP n Service:: AuthUsername = Not Blank
where X = A or B, n = 1, 2, 3, or 4. Otherwise the service is considered disabled.
2
ITSP Profile C and D are available on the OBi202 only