Obihai OBi110, Administration Manual

Page: 105 / 202

Copyright 2010-2012 Obihai Technology, Inc. 105
Note: 1 ring is approximately 6s
MWIEnable Enable Message Waiting Indication Service for this service. If
enabled, device plays stutter dial tone on the PHONE port (or
PHONE1 port) when there are new messages for the subscriber.
It will also turn on VMWI signal on the PHONE port (or PHONE1
ort) if X_VMWIEnable is set to Yes No
MWIEnable2
3
Enable Message Waiting Indication Service for this service. If
enabled, device plays stutter dial tone on the PHONE2 port when
there are new messages for the subscriber. It will also turn on
VMWI signal on the PHONE2 port if X_VMWIEnable is set to Yes No
X_VMWIEnable Enable Visual Message Waiting Indication for this service for the
PHONE port (or PHONE1 port) No
X_VMWIEnable2
3
Enable Visual Message Waiting Indication for this service for the
PHONE2 port No
MessageWaiting This is a state rather than a configuration parameter, that
indicates if there are any new messages for this subscriber on
the service provider’s voicemail system No
AnonymousCallBlockEnable Enable blocking of Anonymous Calls on this service. Anonymous
calls are rejected with a SIP 486 (Busy) response and Call
Forward On Busy service is not applied.
Note: It is possible for a user to set this parameter from the
phone using a Star Code No
AnonymousCallEnable Enable masking of Caller-ID information for all outgoing calls. If
enabled, the called party should perceive the call as coming from
an anonymous caller.
Note: It is possible for a user to set this parameter from the
phone using a Star Code No
DoNotDisturbEnable Enable Do Not Disturb Service. If enabled, all incoming calls on
this service are treated as if the device is busy.
Note: It is possible for a user to set this parameter from the
phone using a Star Code No
X_BridgedOutboundCallMaxDuration Limit on the call duration in seconds for all outbound calls that
are bridged from the same or another trunk. A blank or 0 value
implies the call duration is not limited.
X_AcceptDialogSubscription Enable the device to accept SUBSCRIBE to this trunk’s dialog
event package FALSE
X_AcceptLinePortStatusSubscription Enable the device to accept SUBSCRIBE to the LINE port status FALSE
X_SkipCallScreening Enable the device to automatically skip call screening when the
underlying ITSP is Google Voice FALSE
X_SRTP This is a drop down list with 3 choices:
- Disable SRTP = Do not use SRTP for all calls; the call will
fail if the peer insists on using SRTP only
- Use SRTP Only = Require all calls to use SRTP; the call
will fail if the peer does not support SRTP
- Use SRTP When Possible = Use SRTP for a call if the peer
supports SRTP; otherwise fallback to use regular
unencrypted SRTP
Disable SRTP