Obihai OBi110, Administration Manual

Page: 103 / 202

Copyright 2010-2012 Obihai Technology, Inc. 103
“Park”, “Night”. It should be no longer than 7 characters due
to space limitation. This attribute does not apply for a
sidecar button
Note: Other than “Ext 1” and the generic “Speed Dial” function,
all the other button functions are only applicable if the service
installed on this SP is from an OBiPLUS system.
This parameter is useful only if the
X_Proxy parameter is
enabled. In that case, the OBi will provide a configuration file
based on the attributes given in this parameter, upon request
from an IP phone with the matching MAC address. The IP phone
must be installed on the LAN side of the OBi and must be one of
the following make/model:
-
Cisco/SPA303
- Cisco/SPA504G
- Cisco/SPA508G
- Cisco/SPA509G
SP”x” SIP Credentials
AuthUserName The User ID to authenticate to a SIP UAS (User Agent Server)
when an outbound SIP request sent by the device is challenged
by the UAS with a 401 or 407 Response
AuthPassword The Password (corresponding to AuthUserName) to authenticate
to a SIP UAS (User Agent Server) when an outbound SIP request
sent by the device is challenged by the UAS with a 401 or 407
Response
URI This parameter affects the way the AOR is formed by the device
in outbound SIP Requests. The AOR has the format:
user@domain.
If the value of URI is empty, device gets the user portion of its
AOR from the AuthUserName, and the domain portion the value
of ITSP Profile’s UserAgentDomain if it is not empty, or that of
the ProxyServer otherwise.
If the value URI is not empty and does not contain “@”, it is used
as the user portion of the AOR while the domain portion is
formed the usual way.
If the value of URI contains “@’, it is interpreted as a full AOR
and device takes it as the AOR as is.
Some Examples:
1) Let ProxyServer =
sip.myitsp.com , AuthUserName =
4089991123 , URI=[empty], UserAgentDomain=[empty], then
AOR = 4089991123@sip.myitsp.com
2) Change UserAgentDomain to
users.myitsp.com , then
AOR = 4089991123@users.myitsp.com
3) Change URI to bobdylan, then
AOR =
bobdylan@users.myitsp.com
4) Change URI to
bobdylan@superusers.myitsp.com , then
AOR = bobdylan@superusers.myitsp.com
Note: In all cases, device uses AuthUserName and