Obihai OBi110, Administration Manual

Page: 124 / 202

Copyright 2010-2012 Obihai Technology, Inc. 124
is in a busy state (such as ringing, dialing, playing
reorder, or already having 2 calls in progress)
Note: It is possible for a user to set this parameter from
the phone using a Star Code
CallForwardOnBusyNumber Directory number to forward all incoming calls on this
service when the device is busy. Maximum Length is 127
characters.
Note: It is possible for a user to set this parameter from
the phone using a Star Code
CallForwardOnNoAnswerEnable Enable call forwarding of all incoming calls when the call
is not answered after a period as specified in
CallForwardOnNoAnswerRingCount. If
CallForwardOnNoAnswerNumber is blank, this
parameter is treated as if it has been set to No.
Note: It is possible for a user to set this parameter from
the phone using a Star Code No
CallForwardOnNoAnswerNumber Directory number to forward all incoming calls when the
call is not answered after a period specified in
CallForwardNoAnswerRingCount
Note: It is possible for a user to set this parameter from
the phone using a Star Code
CallForwardOnNoAnswerRingCount Number of rings to be considered by the device as no
answer to an incoming call.
Note: 1 ring is approximately 6s 2
AnonymousCallBlockEnable Enable blocking of Anonymous Calls on this service.
Anonymous calls are rejected with a SIP 486 (Busy)
response and Call Forward On Busy service is not
applied.
Note: It is possible for a user to set this parameter from
the phone using a Star Code No
AnonymousCallEnable Enable masking of Caller-ID information for all outgoing
calls. If enabled, the called party should perceive the call
as coming from an anonymous caller.
Note: It is possible for a user to set this parameter from
the phone using a Star Code No
DoNotDisturbEnable Enable Do Not Disturb Service. If enabled, all incoming
calls on this service are treated as if the device is busy.
Note: It is possible for a user to set this parameter from
the phone using a Star Code No
BridgedOutboundCallMaxDuration Limit on the call duration in seconds for all outbound
calls that are bridged from another trunk. A blank or 0
value implies the call duration is not limited.