Obihai OBi110, Administration Manual

Page: 117 / 202

Copyright 2010-2012 Obihai Technology, Inc. 117
announced for 3 times, the AA directs the caller to
the number specified in this parameter. If this
number is not specified, the AA simply terminates
the current call. Note: According to the
default DigitMap and
OutboundCallRoute, calling
0 means calling the PHONE
port
UsePIN Enable the use of PIN to authenticate callers when
they select the option to make a further call. If
PIN1, PIN2, PIN3, and PIN4 are all empty, device
treats it as if UsePIN is set to No. Otherwise, the
caller must enter one of the non-empty PIN in order
to proceed,
No
PIN1 PIN code to make a call (must be all digits).
Maximum Length = 15
PIN2 PIN code to make a call (must be all digits).
Maximum Length = 15
PIN3 PIN code to make a call (must be all digits).
Maximum Length = 15
PIN4 PIN code to make a call (must be all digits).
Maximum Length = 15
Auto Attendant Prompt Parameter Guide:
Parameter Description Default Setting
Welcome Prompt List to replace the system’s Welcome message
InvalidPin Prompt List to replace the system’s InvalidPin message
EnterPin Prompt List to replace the system’s EnterPin message
MenuTitle Prompt List to replace the system’s MenuTitle message
Menu Prompt List to replace the system’s Menu message
PleaseWait Prompt List to replace the system’s PleaseWait message
EnterNumber Prompt List to replace the system’s EnterNumber message
Bye Prompt List to replace the system’s Bye message